What type of EQ are you using?

(shawnmdarnell) · (shawnmdarnell) **Join Date: Feb 2003** 12-26-2005, 1:57 PM

I am looking to add an EQ this winter and am curious to what everyone is using? Pro's and Con's appreciated.

thanks in advance,

shawn

(grant_west) · (grant_west) **Join Date: Jun 2005** 12-26-2005, 2:27 PM

Shawn Im running a "Earthquake" PA-2000. I had a rockford fosgate PE-200. They are pretty much the same I switched from the Rockford to the Earth quake because the earthquake was said to have more line voltage. That was before I picked up a line driver and then it made getting a Eq with a line voltage booster pretty much usless. I think there is lots more Eq's out there that dont boost voltage that are better. So if you looking to boost line voltage then get a Line driver and then get a passive EQ (no Line voltage) We have been using the PPI Eq and it has been working great, Harrold's using one and Tim W as well as Teddy's SAN all use the PPI If your ging to get a EQ I say you go with that one Because it has 2 adjustaments. Example the adjustment button's when they are pushed in they adjust freq's for the front output "Like your Hull speakers" Then when you push the buttons again they pop out it adjust's the rear output or "Tower adjustment's" This is great because the speaker adjustments you have for your Hull are ususally way diffrent then what you have running your Tower, NVS guy's take note.

(shawnmdarnell) · (shawnmdarnell) **Join Date: Feb 2003** 12-26-2005, 2:41 PM

LOL, thanks grant!

(shawnmdarnell) · (shawnmdarnell) **Join Date: Feb 2003** 12-26-2005, 2:53 PM

LOL, thanks Grant!

(coorslight) · (coorslight) **Join Date: Mar 2005** 12-26-2005, 8:00 PM

Second the PPI vote - I only use one channel on the EQ. If I hit the button that changes inputs, the tower speakers are off and are on a seperate volume control. Kinda nice.