nvs addiction mounting on illusion tower

(hobdog) · (hobdog) **Join Date: Apr 2002** 06-28-2005, 7:46 PM

does anyone have pics or can explain to me how the mounting bracket works on this set up. I just got it today, and the directions are somewhat vague about the mounting, and there are no pics to reference.

(auto) · (auto) **Join Date: Aug 2002** 06-28-2005, 8:54 PM

here ya o

(auto) · (auto) **Join Date: Aug 2002** 06-28-2005, 8:55 PM

another shot

(hobdog) · (hobdog) **Join Date: Apr 2002** 06-28-2005, 9:16 PM

OK, so that helps alot. I was going about it all backward. So I assume one side of the bracket attatches to the upper bolt holes for speakers on the side of the tower. Then the flat spot on the bracket with the two largest holes would attach to the top plate of the speaker which has four holes in it, so I would have to take that plate off and attach it to the speaker. If the bracket does attach like I said, to the side of the tower, how did you get the speaker wires out, because the bracket covers the hole that they come out of?

(chas) · (chas) **Join Date: Feb 2002** 06-28-2005, 9:55 PM

here are a couple more

(eubanks01) · (eubanks01) **Join Date: Jun 2001** 06-29-2005, 7:58 AM

So do you still use the pre-cut hole for wiring the Addictions? That would be awesome to not have to cut another hole in the tower.

Big pimpin' Shane!

(chas) · (chas) **Join Date: Feb 2002** 06-29-2005, 11:14 AM

You can use a couple of washers between the tower and mount to clear wire.

(hobdog) · (hobdog) **Join Date: Apr 2002** 06-29-2005, 8:34 PM

Thanks for the pics guys, I got it installed tonight,and I could not be happier.

(nvsairwarrior)

Jason,
Sorry for what must be less then adequate instructions. I'll work on that.
Hope all is good.
Thanks too Charles and Shane.
D out