i thought the sizing was pretty true... but i suppose it is very subjective matter eh? i got 11 size D2 and i have 10.5 size foot. in the store i thought the 10s were to tight (toes more then just touching the end... a little cramping, but this is without heat molding...). BUT later, after some use, i decided that i wanted a little less room in the toe-box and inserted a cut up piece of foam in the bottom of the boot under the liner to squeeze things up just a tad... just an idea and to tell my experience. i guess my philosophy at the time was, "it'd be easier to get a size too large and ADD TO it then to take away from a size too small" go to a store and try a SS boot on to get an idea if you can OR wherever you are buying it from might be able to switch the size if you don't like it within a period of time? contact them and ask (Message edited by wakerider111 on February 17, 2009)
|