LF 08 binding hardware

what EXACTLY do i need? I have vantages and 8 bolts that fit the bottom of the boots. is this all thats needed to fit the plates to the boots? seems like there should be something else, because driving the bolt down into the boot is gonna press into the plastic. the bolts have a V head on them where maybe they should be flat or there should be some type of washer or something.

i know i need the CAM clamps as well. but the plate to boot hardware is what i'm concerned with.

The 8 screws are all you need. You don't have to go over the top tightening them. They are countersunk so they don't interfere with the board when you mount them.