Quote:
Originally Posted by floorx4
Dave,
Once again you always have the most informative posts. The option missed is that of me keeping my Syn2 for the Rev410 and just buying 1 more amp. Either the Syn4 or the JL HD750/1.
Is there a draw back to running a Syn2 to Rev410 and a JL HD750/1 to a pair of Rev10's type setup?
|
No serious draw back. One amplifier would change power from a 13.5 supply (maximum voltage when underway) to 12.0 volt supply (minimum voltage when at rest) while the other would not. And it's a difference that is on the threshold of audibility at rest but not audible when underway. So you would be setting the gains in the middle at 12.7 volts as to cut any differential in half.
If I started with the Syn amplifier I might stay with the Syn line just for cosmetic uniformity. It may not be a technical reason but it would weigh in for me.
David
Earmark Marine