Perfect Pass Settings

(antoddio) · (antoddio) **Join Date: Dec 2006** 09-04-2009, 10:05 AM

My perfect pass isn't terrible, but it tends to hunt around a bit, esp if there are any waves around.

I have the PP manual explaining what KdW and NN (PW) are, but it's not necessarily straight forward. The factory settings are KdW 80 and NN 120. I have bumped up the KdW to 120 and I'm not sure if I notice that much of a diff.

I have a Supreme V232 which is a 4200lb boat and I prob have about 1300 to 1800 lbs of weight between the stock ballast and people in it while I am riding. It has a 330HP 5.7L.

Just wondering if anyone else has had luck playing with these settings.

(Message edited by Antoddio on September 04, 2009)

(bremsen) · (bremsen) **Join Date: Aug 2005** 09-04-2009, 10:49 AM

I usually mess with the NN (filter) setting first. Its basically a 'reaction' setting and the lower the number the quicker it will be to react to speed changes. Once I feel like its reacting fast enough (drops <.5mph), I'll adjust the pull rate (kdw) so that it keeps speed w/in a few tenths of the set speed.