Currently my system is running off my EQ which I hook my iPod directly to. I still have the HU that I use just to provide the remote turn on signal to my amps as well as the EQ.
My problem is the HU is not turning on and I'm gonna try a few more steps troubleshooting that, but I'd rather just wire my accessory switch right to my EQ's remote lead slot and have it chained to my amps and just bypass the HU all together.
I have attached a picture below of the back of the accessory switch that is currently hooked up to the HU. My guess would be that I want to use the middle slot to hook up to the remote slot of my EQ and then have that chained to all the amps. Is this correct? going out on a limb here
Linear Mode
