Need help!!!

(soonerbilly) · (soonerbilly) **Join Date: Jul 2013** 04-10-2016, 5:19 PM

I took my windshield off my boat (2002 CalabruaPro-V ) to get the frame powder coated and the glass tinted. It's all back together and back on the boat. BUT, there is a channel on the bottom of the frame where the screws are that held what looks to be about 3/4" to 1" rubber tubing that fills in the channel and hides the screws. Ive searched the web and cant seem to find anything to replace it. ANYONE have a link or what i should be searching for?

(rallyart) · (rallyart) **Join Date: Nov 2006** 04-11-2016, 7:39 AM

Was it foam, or tubing, or an inset plastic. It could be the same as the moulding on the rub. Or it could be this type of material.

(2step) · (2step) **Join Date: Oct 2004** 04-11-2016, 9:29 AM

Try eBay, I am not sure exactly what foam you need but there are a ton of options. I typed in "boat windshield foam" http://www.ebay.com/itm/TRITON-17549...9RW-73&vxp=mtr

(soonerbilly) · (soonerbilly) **Join Date: Jul 2013** 04-11-2016, 9:36 AM

its more plasticy ( is that a word?) And tubular.....didn't think about it being like rubrail insert. Thanks Art...I'll try that route.

(rallyart) · (rallyart) **Join Date: Nov 2006** 04-11-2016, 12:48 PM

Looks like 2Step might have found what you need.

(soonerbilly) · (soonerbilly) **Join Date: Jul 2013** 04-11-2016, 6:16 PM

The link is foam....the "tubing" i have is very rigid. Didn't find anything yet using the rubrail idea. Guess I'll keep looking. There has gotta be a supplier for this crap somewhere.

(CALIV210) · (CALIV210) **Join Date: Jun 2015** 04-12-2016, 8:23 AM

Maybe Calabria dealer can source it for you ?