locking in perfect pass

does anyone else have issues with pp at slow speeds? Below 19mph or so, mine doesn't lock in very well at all. Never worried about it much before b/c all we did was wakeboard, but now that the crew is getting into surfing, i'd like to lock it in at slower speeds.

I know pp has some adjustments that can be made to it, never really spent much time looking into details.

try to change from speeds, to rpms. it has an easier time with 3400 rpms, than 10.8

good luck. I think you hold down menu, until it flashes then change it from mph to rpm.
if not check perfect pass manual.

Are the MPH sync'd with the regular speedo? You want to adjust your KDW and you also want to ensure your chipped correctly. Do you have Pro, or Wakeboard Pro, or Cruise?

There are software updates as well, bringing you to the latest, depending on model/age. You can also call them on the water and tell them what you are doing/experiencing and they'll help you tune and dial it in on the phone. Their support rules.

Call them from the lake as it's happening.
(902) 468-2150

I have wakeboard Pro. Thanks for the tip, I just talked to tech support. Going to try rpm mode, see how that works...

if you have a gps unit you can get the speed from that and calibrate from there..

or us rpm mode like me