My brakes went out on my boatmate trailer. I already replace the pads and blead the brakes last summer and it didn't help at all. I was getting a lot of play when I stopped and started. So I had boatmate send me a new surge brake system and trailer tongue.
But do I use the fitting in the pic. If I do it is the wrong threads to fit it too the back of the new cylinode and I can't find any to work.
I talked to a couple boat dealers today and they say screw the brake line directly in to the back of the cylinode and it the thread do work that but you can only twist the brake line so many times before its twisted to much and that not tight enough.
|