Looking for a new amp?

(tkw) · (tkw) **Join Date: Jun 2012** 07-15-2012, 8:21 AM

I am looking for a new amp to power my 6 polk mm650, I would like to put a lots of power to them or what ever you guys suggest! Any suggestions? There are last years models.

(murphy_smith) · (murphy_smith) **Join Date: Dec 2005** 07-15-2012, 8:54 AM

Wetsounds HT-6

It is 110 watts x 6 channels. Every speaker would have it own channel and would be driven at 4 ohms. Since this amp is a class D and you would be running at 4 ohms - it would be the cleanest and most efficient way to do it.

http://www.wetsounds.com/pages/products/HT6.html

(tkw) · (tkw) **Join Date: Jun 2012** 07-15-2012, 11:48 AM

Thanks, They are 180 watts peak, I don't have tower speakers at the moment so i was hoping to get get them as loud as possible, How much difference will it make if i put more power to them or is that plenty? 150 ish?

(bryce2320) · (bryce2320) **Join Date: May 2012** 07-15-2012, 1:59 PM

You'll want the headroom on the amp so you don't gave to run the gain full throttle. Set ur headunit 3/4 volume and tune your amp in from there. When it starts distorting turn the gain back down a little bit and you'll b good.

(bryce2320) · (bryce2320) **Join Date: May 2012** 07-15-2012, 2:07 PM

110 to each speaker is rms, so actually closer to 220 max each which is plenty IMO.

(stevev210) · (stevev210) **Join Date: Feb 2005** 07-15-2012, 4:59 PM

I just installed the wetsounds HT6 in my 06 Xstar pushing the 6 interior JL componets and a sub and its rockin!

(tkw) · (tkw) **Join Date: Jun 2012** 07-15-2012, 5:01 PM

What sub are u using? That amp sounds and looks pretty good! Probably gonna order one in the next couple of days.

(stevev210) · (stevev210) **Join Date: Feb 2005** 07-15-2012, 7:10 PM

right now its just the stock 10" jl sub that MC uses but will be going with a JL w3 12"