|
You can get on boat test .com and check out several tested examples, here is one 22 foot to 22 foot MC 4000lbs, Tige 4000 lbs , MC 90gals , Tige 48 gals, MC 171 nautical miles, Tige 168 nautical miles, both same speeds.
As to pcm 6.0l CC or Tige they are infact same ratio same hp 409 , treamendous difference in hull design, Tige uses a deta pad which gives a lower coefiencent of drag at any speed , also with the trim a Tige goes on plane in less time which again you can check out on boatest ,com.
As to ride quality Tige is built with penske synthetic which absorbs more shock.
As to turning Tige will turn perfectly in either direction unlike MC or CC and with no prop cavitation.
But again as I said before , go out and test all in same conditions , loaded and normal , demo the way you would use it and be the judge.
And yes I have been in all of them except the new G23 and can make this claim, also have and continue to work and test drive them regularly .
Hope this gives you enough data, but search out on boatest .com.
|
Threaded Mode