I have spent the last few months reading countless threads on boats and wound up buying an 06 Enzo SV230. It is my first ever boat. and thank you to everyone that assisted when I posted questions while searching. We got hooked on wakesurfing last summer out at Powell and McConoughy. I have read previous threads on the subjects for hours on end and have a pretty good handle on most things but now need some specific advice. The boat came with a fixed trim tab. I bought a mission delta shaper and two 1000lb bags to supplement the 350 stock tanks. That seemed like the path of least resistance and get the same weight as the Enzo bags. Also bought the brackets to reinforce the panels. Now for the two questions.
Trim Tabs. I am goofy. Everyone else is regular. I have read that an asymmetrical trim tab will clean up the goofy side. For the life of me I just can't find where to buy one. Is the mission delta going to accomplish the same thing? Do I need to install one with an actuator as well?
Ballast. Boat is not close to me right now, but I recall there are vent hoses going through the lockers. No sideswipe. How does that work with the bags?
Trying to get all the parts together so I have what I need first time out.
All help is very much appreciated.
V2
|