Tower Installation

So me and some friends are all gonna throw some money towards a boat and put a tower on it and some sacs in it... My question is how hard is it to get these universal towers mounted??? Is it a job for proffesionals??? If so how much should I expect to pay for an installation??? Here is the link for the tower im lookin at.

http://cgi.ebay.com/Dragon-Universal-Wakeboard-Tower_W0QQitemZ300216173912QQihZ020QQcategoryZ1527 2QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

The boat we would be putting it on is a 1987 Supra 21 ft direct drive. THANKS for the input all!!

I've installed a couple towers, I think if you know your way around basic tools, it should be no problem. Here's the advice I can offer:

1) Buy a quality tower (I dont know much about the one you've shown, maybe someone else can chime in. Personally, I like monster for the $)
2) Take your time
3) Use the correct tools, follow instructions carefully
4) Measure very carefully
5) Take your time
6) Measure again
7) Measure 1 more time
8) Drill through gelcoat in reverse (it helps keep the gelcoat from cracking)
9) Don't overtighten the tower mounts
10) Enjoy your new tower, make sure to check all the bolts periodically to make sure they're tight.

Don't pay someone to do it unless you're very nervous around handtools.

-Steve

P.S. if you're willing to spend a couple extra bucks, DBG concepts here in San Diego makes one of the nicest looking universal fit towers out there.

http://dbgconcepts.net/content/view/24/41/

Good advice Steve "I like monster for the $) "

The girls are good too.

http://www.monstertower.com/

There are some Supras here Jesse

http://www.monstertower.com/customerphotos/index.htm

Ok cool! Thanks for the input guys! Im gonna go with the tower I posted. I talked with the guy that sells them he pretty much guaranteed I wouldnt be dissapointed so ill post up if its a good one.