2 awg Power Rings

(jonblarc7) · (jonblarc7) **Join Date: Jul 2006** 03-29-2015, 6:31 PM

Anybody know a good place to buy six 2 awg ring connectors. I'm swapping out some wires in the battery bank and perko to some better 2 awg cables. I just can't find any locally at the auto parts store.

(corerider) · (corerider) **Join Date: May 2008** 03-29-2015, 7:36 PM

Carquest and NAPA auto parts stores usually keep a decent selection on the shelves.

(shawndoggy) · (shawndoggy) **Join Date: Nov 2009** 03-29-2015, 8:02 PM

Harbor freight

(jonblarc7) · (jonblarc7) **Join Date: Jul 2006** 03-30-2015, 5:56 AM

I found them at Napa on line but what size stud size should I get.

5/16"

3/8"

1/4"

1/2"

This is for connecting the starting and stereo battery to the perko

(jonblarc7) · (jonblarc7) **Join Date: Jul 2006** 03-30-2015, 6:21 AM

Ok I found out the Blue sea perko switch is a 3/8 post so I'll go with one I think.

(boardjnky4) · (boardjnky4) **Join Date: Dec 2011** 03-30-2015, 6:28 AM

you can go a little large, that's what washers are for.

(jonblarc7) · (jonblarc7) **Join Date: Jul 2006** 03-30-2015, 6:48 AM

I figured I could drill them out a little if 3/8" is to small for the battery.

(corerider) · (corerider) **Join Date: May 2008** 03-30-2015, 8:40 AM

IIRC 3/8" is the common battery stud size.

(jonblarc7) · (jonblarc7) **Join Date: Jul 2006** 03-30-2015, 8:41 AM

Good I'm picking them up at lunch and will be on the boat by tomorrow.

(jonblarc7) · (jonblarc7) **Join Date: Jul 2006** 03-30-2015, 3:30 PM

Got it done this afternoon. Now I just got to put them in the boat!!!