So I took out the old hard tanks,put in sacks.All the pumps are still the same,rerouted the hoses,and put quik connect fittings in them,so I could remove the sacks and clean,etc.
We took it out Saturday,filled the sacks,everything seemed to be good,but when we move/drive,it drains out the side where its supposed to pump out.
Placement is overflow is coming out ahead of the vdrive sacks from the top,fill is on top of the sack towards the rear of the boat,but I had drain bottom of the sack toward the back of the boat.
Would this be to much pressure on the pump,and make it drain with it in the off position?
I have moved it to bottom front,taking the pressure off of it while driving,but havent tested it yet.