I am not a expert but a wrap is a basically vinyl sticker that goes over your boats gel coat to change its appearance. They are printed off and you wet the back side down and put it on your boat and use a squeegee to get all the air bubbles out and then you heat it up to evaporate the water and the vinyl will stick to the boat. The time they last depends on how you use your boat and how good the vinyl is. The vinyl can be scratched and can peel if rubbed against a dock. It can probably fade also if out in the sun all the time. Hope that helps I tried to do one myself and failed but if I had another person and if I did it inside out of the wind it probably would have worked. I think I will try again next spring.
|