New to me Sanger V210

Just bought a 2006 Sanger V210 Black Scorp. First inboard for me. Last 10 years I had an '87 Sanger TX which is an I/O. I take a trip up to Donner Lake which is at 5,900' elevation every summer. On my old boat I would swap the prop for a better hole shot primarily for deep water starts on my comp slalom ski. The old I/O didn't really need the prop change other than for the slalom start and it was a carb.

I have no experience with inboards at elevation. I know a lot of you run a lot of weight at elevation so you have to go with a lower pitched prop. When we ski, it's just the oberserver and driver and of course we are running light. Do you think I will need to swap the prop on the V210 for deep water slalom starts?

We will also be wakeboarding but only with the 500lb center ballast filled. Based on my few times out on the new boat at sea level, I'm not worried about pulling a wakeboarder at elevation. Boat has plenty of power.

So... I'd rather not spend the money on a new prop just for the slalom start if I don't have to.

The new boat...