All joking and jabbing aside If you're going to take the time to mount an amp that costs $$$ go ahead and glue it to the hull using grant or Seans method. I used the locktite version of liquid nails pl construction adhesive I believe, and worked great. Prep on the hull as grant mentioned is key, and scoring or pitting the backside of the material to be mounted helps. The adhesive used on velcrow I'd be leery of using because as the temperature gets hotter it's more likely to fail than something meant to be more permanent. I'm sure the velcrow portion would hold together if you used a big enough contact area, but the thin layer of glue they use is the weak link.
|