Hi folks, just looking for some ideas here...i've got a Wetsounds Syn 2-ch amp that's a few seasons old, and have been redoing some things on the stereo this season, and when I got it all put back together the amp powers on with a long followed by three short blinks, then full green, which indicates a short somewhere in line. I initially found one of the 3 25a fuses was blown and replaced it, but the same issue occurred, so I monkeyed around a bit and have been unable to get it firing. Wanted to see if anyone else had experienced this, and if so, might be able to tell me where my problem is?
Currently, the amp has no RCA's or speaker wires connected, only a 4awg ground and power, and remote lead. Both the power and ground cables are shared by two other amps that are functioning correctly. All fuses are 25a and are in good shape. Any ideas would be greatly appreciated, as i'm missing my tower tunes!
Thanks in advance!
-Tony
|