Has any else had problems with Rev10 swivel mounts....

My swivel mounts have been a sore spot in an otherwise amazing speaker. First the wiring on the the clamps were glued differently, one with what looks like hot glue and one with a black adhesive. When i took the speaker down from the clamp the wires came with it and were hanging from the tower and i had to macgyver back together (the hot glue clamp failed). Next the fork design stripped the mounting clamp out as well as the actual allen screw today. I'm tightening by hand with an allen wrench, not a power tool and it completely destroyed the screw and the threads in the clamp too. I was cautious because of the tendency for stainless to gall, but it still bit the dust. I've only taken the speakers down once and tried putting them back on for the first time today since the install.. I can't imagine these lasting an entire season. They seemed super tight and difficult to thread right out of the box. Has anyone else had a problem or am I just that unlucky? It just happened today so i'll contact ws monday and hope for the best.