I had an issue with my center hard tank pump on my 06 VLX. I picked up a tsunami pump versus the stock unit.
The pump that was in there was basically laying on the hull with the fitting loose (fitting that goes into tank), so the pump was really free to flop around. When I re-installed the new pump, I was going to use epoxy on the parts that won't need to be dis-assembled for any servicing. I was thinking this way, the pump could stay perpendicular to the bottom of the tank versus the pump laying on the hull. Will I have any draining issues with the pump straight up and down on the tank, or is it beneficial to have it flopped to the side (lower).
Hard to explain exactly what I am getting at, I will snap a picture tonight also.
|