I should be finishing up the wiring on the new flybridge stereo set up tomorrow and be ready to start tuning. Set up is:
JVC Marine KD-R85MBS Deck
PPI 900.5 Amp
Polk DB651 6.5 inboats
Polk DB1240 12 inch SVC sub in a 1.8 Cu foot box tuned to 36Hz
Inboats on channels 1-4 and the sub is on the sub channel
So the starting points I used in the past are:
inboats: filter on Hi-pass set to 90 htz running gains around 35-50%(starting at 0 and working up)
Sub: filter set to low-pass at 100htz. Gain to about 50%(starting at 0 and working up)
Amp also has a subsonic filter for the sub, where does that get set to? Also to I adjust the sub tuning for the 36hz tuned port on the box.
I have always used wet sounds stuff in the past so the stuff on this PPI is a little different to me. Any help and advice with this equipment is appreciated.
|