Blair,
I just finished upgrading my brakes. I got new calipers, pads, lines, rotors, along with bearings and seals. I also replaced the actuator. That is the part you have just replaced. When I get home today I'll look and see if I put that piece back in my new actuator. I'm pretty certain that I did. It seems I recall it feeling a little weird as I screwed it together, but it did tighten up and the brakes seemed to bleed out OK.
JMan
BTW, if anyone needs my old calipers, rotors and stuff, it is still in great condition. I just wanted to redo everything for piece of mind.
Last edited by jmanolinsky; 04-20-2015 at 9:33 AM.
Reason: added a note
|