Hello guys! My wife and I just bit the bullet and purchased a left over 2015 Supra SC400, with the Swell system. We love the boat, but need some help setting up our waves. For the most part, it will be one of us pulling the other, with little or no passengers. We are surfing the port side, and have the swell system set on 0 (port) and 15 (starboard), for the "skim" wave. I had some suggestions of favoring surf side by 200 lbs, and 50-60% in the front, but that was horrible. The boat rode very nose high, to the point of little to no visibility. The swim platform was completely submerged during surfing, creating a bad wave. The fix for that was 100% full in the front. The only way to favor the surf side is to leave ballast out of the starboard, which we tried from 50-85%. Didn't seem to help much. Curious if anyone has any advice or similar experiences.................we are leaving tomorrow for the lake and I'd like to get this thing surfable for the weekend. Im also curious if the swell settings ever need to be adjusted. I have the V2 guide,but all the data points towards 0, 15, 40, 0 on the settings. Would bringing both tabs down help get the nose down, say 30 port and 45 starboard? Any input is greatly appreciated!
(To be fair, I have talked to my dealer, and Supra, and they are working to get a Swell expert to take me out for a lesson/demo. Im satisfied with the support from my dealer and Skiers choice, but in the mean time, would like some to ideas to try and make my weekend better
)