What the blank are you going to do this weekend? I just cut in to my last EPS blank. I made four homemade EPS blank boards. The prototype was a bit weak; it still in one piece but its delaminating pretty bad. The second I gave away to the “Crush the Ice for Life” event in Rome, Indiana, the third I made to give to the city to thank them for letting us use Griggs for Nationals last year, and the fourth I made for a friend. This one will be for me.
This blank is a remnant from one of the other four boards. The blank that doesn’t quite fit my hot wire guides. I did use the rocker guide. The foil will be more free form. I'll have more flying foam fuzzes than normal. I'm hoping the foam blows away in to SD's back yard.
I’ll do another resin swirl on the bottom of the board and maybe a fabric inlay on the deck. I bought more futures fins and boxes and I bought X-Trak Long Bow traction.
Oh, and tomorrow will be surf day.
Here’s the blank
Cut for stringer install
New clear gorilla glue. The polyurethane Gorilla glue works better and faster when you wet the surfaces.