06 X2 - Depth Gauge displaying "Bad"

(dmontandon) · (dmontandon) **Join Date: Jul 2006** 06-15-2010, 5:35 PM

Help, the depth gauge says "BAD" however the rest of the multi gauge functions are working properly (air temp, water temp, etc). How can I fix this? I cant see to find any fuse to check between the module and the power... Any ideas guys?

(hatepain) · (hatepain) **Join Date: Aug 2006** 06-15-2010, 7:26 PM

Thats not good!

(chestech) · (chestech) **Join Date: Sep 2004** 06-15-2010, 8:16 PM

Wish I had more for you... mine did the same thing the first day out of storage. After a few hours in the water it started working again.

(dmontandon) · (dmontandon) **Join Date: Jul 2006** 06-18-2010, 2:22 PM

Okay I know folks on here before have had this same prob, help a bro out....

(talltigeguy) · (talltigeguy) **Join Date: Sep 2003** 06-18-2010, 6:47 PM

I have the same problem on my 2006 X45. The guys at Team talk were of no help either. If the guys on the MC website can't give any help, then I think we are hosed with either taking it to the dealer or replacing something myself.

I called the dealership and was told that there were so many things it could be, that they would have to have the boat to troubleshoot it. I was thinking of just replacing the transducer, because that is the most likely problem, but what if something else is the problem? Since the display works, I am hard pressed to beleive it would not work to just replace the transducer.

BTW, my water temp guage has never been accurate...it reads just a little less than air temp...always.