WakeWorld

WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Wakeboarding Discussion (http://www.wakeworld.com/forum/forumdisplay.php?f=1)
-   -   Looking for Company Binding Mounting System (http://www.wakeworld.com/forum/showthread.php?t=797954)

bschall 05-05-2013 9:06 PM

Looking for Company Binding Mounting System
 
Long story short today I fell and ripped my binding through the tracking off of my slingshot reflex. During that I also managed to snap the mounting system on my company Vandall Bindings. The board is toast but the bindings are still good if I find new mounting brackets for them.

If anyone has an extra set of these I would love to take them off your hands.


Thanks
B

carter134 05-06-2013 7:21 AM

good luck man i lost a mounting peice from my pros 3 years ago and havent been able to find any

broke_folk 05-06-2013 7:40 AM

http://sfbay.craigslist.org/eby/boa/3775303108.html
Don't know of they would fit.
But there is a person Bay Area selling a pair of boots and use the binding mounts from them.

williamburell 05-06-2013 7:42 AM

Which plate type? The plate with the outside bolt holes like normal bindings or the clamped interior ones? I may have a few sets in the garage i'm not using.

bschall 05-06-2013 10:25 AM

On mine both sides were clamped . The one that i broke was the outside clamp.

rayatrogue 05-09-2013 6:44 PM

I Probably can get my hands on some from the factory. Spread the word and let me know if there is anyone else out there that needs a set.
Also, I imported a few pairs of never released Company boots, they were to be the 2011 models, with some revisions that fixed some issues the 2010 models had. If any one is interested in getting some PM me and let me know.

bschall 05-09-2013 7:22 PM

pm sent @rayatrogue

bboozer 05-10-2013 5:47 PM

I would be interested, but I can't figure out how to send a PM.... I had a set of Company Pros and broke them and got lucky and found a used set on EBay... but would definitely be interested in another set if the price is right

jburbo 05-10-2013 6:20 PM

Quote:

Originally Posted by bboozer (Post 1821623)
I would be interested, but I can't figure out how to send a PM.... I had a set of Company Pros and broke them and got lucky and found a used set on EBay... but would definitely be interested in another set if the price is right

click on Rays name and click the Send Private Message link. if he has your size you should definitely grab a pair while you can. I snagged two pairs of the new Vandalls, they are sick. I think all he has left are Pros now, but send him a message for sure.

bboozer 05-10-2013 7:45 PM

It won't let me send a message. .....maybe it just won't work from my tablet.....

waketac 05-13-2013 7:13 AM

Hi,

I've been looking for quite some time to find the mounting brackets for my 2010 Vandall's, since they broke on a hard crash.
But I can't send a PM to rayatrogue. The link to "Send a private message to rayatrogue" only leads to the public profile.
Any ideas how to get a message/E-Mail to him?

Quote:

Originally Posted by rayatrogue (Post 1821401)
I Probably can get my hands on some from the factory. Spread the word and let me know if there is anyone else out there that needs a set.
Also, I imported a few pairs of never released Company boots, they were to be the 2011 models, with some revisions that fixed some issues the 2010 models had. If any one is interested in getting some PM me and let me know.


jburbo 05-13-2013 7:56 AM

check to make sure you dont have popups turned off, the PM box comes up as a popup i think.... ill see if i can get you an email.

waketac 05-13-2013 11:55 PM

Quote:

Originally Posted by jburbo (Post 1821928)
check to make sure you dont have popups turned off, the PM box comes up as a popup i think.... ill see if i can get you an email.

Popups are allowed, I tried switching them off and on again. Still no possibilty to send a PM. If You could get me an e-mail-adress or another way to connect rayatrogue that would be great.

rayatrogue 05-14-2013 10:25 AM

My email is ray@roguedesignsyndicate.com

behindtheboat 05-14-2013 11:17 AM

I have a pair of never used Vandals size 9 I could maybe get rid off.

MattieK27 05-17-2013 10:37 PM

Quote:

Originally Posted by rayatrogue (Post 1821401)
I Probably can get my hands on some from the factory. Spread the word and let me know if there is anyone else out there that needs a set.
Also, I imported a few pairs of never released Company boots, they were to be the 2011 models, with some revisions that fixed some issues the 2010 models had. If any one is interested in getting some PM me and let me know.

This guy is the man. Ray, thanks for helping me get a pair of unobtainium boots. Now I have to figure out if they will ever see the water...

alexair 05-18-2013 2:56 AM

buy this one and get boots for free
http://www.ebay.com/itm/New-Company-...item53f8df35e2

rayatrogue 05-19-2013 4:53 PM

mo worries matt, thanks for picking up a pair...
Anyone else, I still have quite a few pairs of Pros left. email me and I will give you the current list.

jburbo 05-20-2013 8:05 AM

Quote:

Originally Posted by alexair (Post 1823039)
buy this one and get boots for free
http://www.ebay.com/itm/New-Company-...item53f8df35e2

no mounting hardware with those....

i also need mounting hardware. if everyone that needs hardware can email me i will make a list and see if Ray can order some directly for us. Pretty sure we will need a decent number of people, but anyone that owns Company bindings should probably grab an extra set or two. This stuff is becoming extinct in a hurry. Email is joe@agendasurf.com

rayatrogue 06-04-2013 7:59 PM

Guys just an update, i only have a few pairs as Matt said they are "unobtainium" Pro Boots left. Holler at me for what size you need and I will let you know if I have it and the cost.

slipknot 06-06-2013 7:49 AM

1 Attachment(s)
here is a sample

jburbo 01-08-2014 1:53 PM

i am selling my extra Vandalls now, if anyone is interested. Size 9.

rayatrogue 01-09-2014 6:48 PM

I'm selling the un-released Company boots as well, oily have Pro boots left...

bschall 01-17-2014 11:49 PM

still looking for mounting system or 1 claw at least

rayatrogue 01-18-2014 2:47 PM

I tried to get the factory to get a clamp order going, they just wanted me to order too many.


All times are GMT -7. The time now is 1:33 AM.