WakeWorld

WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Boats, Accessories & Tow Vehicles (http://www.wakeworld.com/forum/forumdisplay.php?f=3183)
-   -   Steering Cable Help on Sanger V210 (http://www.wakeworld.com/forum/showthread.php?t=807449)

sk4910 03-16-2017 7:57 AM

Steering Cable Help on Sanger V210
 
I have a 2005 Sanger V210 and need to replace the steering cable. The cable says Teleflex on it but I cannot find a number. It appears Teleflex has been bought out or no longer in business. I found a cable on skidim.com that references Teleflex part# SSC15421. Can anyone confirm if this is the correct cable?

ralph 03-16-2017 9:16 AM

Quote:

Originally Posted by sk4910 (Post 1955531)
I have a 2005 Sanger V210 and need to replace the steering cable. The cable says Teleflex on it but I cannot find a number. It appears Teleflex has been bought out or no longer in business. I found a cable on skidim.com that references Teleflex part# SSC15421. Can anyone confirm if this is the correct cable?

I used the TELSSC15420 to replace mine in the 2003 V210. I guess the 15421 is 1 ft longer

WheelerWake 03-16-2017 10:19 AM

When I did mine, I had the same situation, seem like the OEM boat manufacture installed a steering cable that was an odd number of feet, but when you go to buy one, they are only offered in even foot lengths.

denverd1 03-16-2017 11:43 AM

get the long one if you aren't sure!

ottog1979 03-16-2017 2:19 PM

I have replaced mine twice. 2002 V210. That's the correct part number (SSC15421). You want 21'.

CALIV210 03-17-2017 8:17 AM

Quote:

Originally Posted by ottog1979 (Post 1955560)
I have replaced mine twice. 2002 V210. That's the correct part number (SSC15421). You want 21'.

sooooo exactly how hard is it to replace is it a matter of attaching one cable to the other and fishing it through or is it gut the whole dang interior type of job?

doubleup16 03-17-2017 2:05 PM

For the most part it's a fairly simple job. Space is the only concern for removal from the rudder control arm and installing the new one, at least on my 230. I tied a string to the rudder end and pulled out the old one and the fed the new one in pulling back the opposite direction.

CALIV210 03-18-2017 6:37 AM

Quote:

Originally Posted by doubleup16 (Post 1955608)
For the most part it's a fairly simple job. Space is the only concern for removal from the rudder control arm and installing the new one, at least on my 230. I tied a string to the rudder end and pulled out the old one and the fed the new one in pulling back the opposite direction.

Awesome thanks for the reply !!

ottog1979 03-18-2017 9:02 AM

http://www.wakeworld.com/forum/showt...steering+cable


All times are GMT -7. The time now is 8:37 PM.