Trying to lay out my configuration for a super sport w/ fly high rear seat sack in the ski locker, and 2 sqaure sacks in the v drive lockers. <BR> <BR>pics would help greatly, thanks!

heres mine in my sanger I did last season.. not too hard... <BR> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/3183/773414.jpg" alt="Upload"> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/3183/773415.jpg" alt="Upload"> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/3183/773416.jpg" alt="Upload">

This is my VLX. 2" mushroom intake and shut off valve. <BR><img src="http://www.wakeworld.com/MB/Discus/messages/3183/773453.jpg" alt="Upload"> <BR>5 pump fill, all 1200 tsunomi pumps <BR><img src="http://www.wakeworld.com/MB/Discus/messages/3183/773454.jpg" alt="Upload"> <BR>ski locker bag <BR><img src="http://www.wakeworld.com/MB/Discus/messages/3183/773455.jpg" alt="Upload">

just finishing mine <BR> <BR> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/3183/773458.jpg" alt="Upload">

sorry cant get the others to upload but you can go to centurion crew and see them all under falcon v custom ballast install

Here is a link with some pics to my ballast install in my 210 on planetnautique. Do a search on that site, there are a bunch of good installs on 210's. <BR> <BR><a href="http://planetnautique.com/vb3/showthread.php?12077-01-SAN-Ballast-Install&amp;highlight=ballast+install" target="_blank">http://planetnautique.com/vb3/showthread.php?12077-01-SAN-Ballast-Install&amp;highlight=ballast+install</a>

<img src="http://www.wakeworld.com/MB/Discus/messages/3183/773504.jpg" alt="Upload"> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/3183/773505.jpg" alt="Upload"> <BR><img src="http://www.wakeworld.com/MB/Discus/messages/3183/773506.jpg" alt="Upload">

those are pictures in my 2003 elite v drive. 11/2 thur-hull fitting with three pumps. two rear lockers and one to front c shaped sack.

Thanks guys, and good work.

do you have to have a shut off valve after your intake and befor the pump?

I'll post some out of my 95 super sport tonight I don't have any pic's at work.

Curt, what kind of C shaped sack do you have in the bow? I've got an '03 Elite V also, and I want to do something in the bow.

Nick, your pumps look like they're pretty low in the bilge, but do you have any issue priming with a mushroom intake? Just curious.. looks good.

Curt, <BR> <BR>Do you have a shutoff incase the PVC breaks below the waterline?

Yea i have a 11/2 bras ball valve connected directly to the brass thru hull fitting. 11/2 pvc pipe out of the thruhull to the pumps. I can turn on all three pumps at one time. Each pump is rated at 10gpm @ 0 psi. More realisticly i am getting 7-8gpm with friction through tubing and elevation. I fill about 1000-1200lbs in ~ 7-10mins. My boat doesn't do well with a lot of weight the wake gets to washy. Personally i don't even notice the fill time by the time i back the boat in the water and my buddy parking the truck the sacks are full.

4 out of the 5 pumps work first time but one pump doesn't always fill right away. I will be checking into it this spring to see what the deal is but I have always just delt with it filling it on and off a couple times then it works.