|
New Kicker we built!! Will anchor soon! East Texas!
3 Attachment(s)
Please compliment our work?!?:o:)
|
pshewww my knees hurt just lookin at it. It looks REALLY well made and has tons of potential. I would imagine you will have to weight down the ramp end to lower it under water a few inches, but doing so will make it even more steep. I would guess it is going to be PLENTY PLENTY steep, so I would weight the launch end of the kicker as well.
If you used barrels, you can just add some water to all of them and equally lower it. Otherwise, find some lead weights and sink it in a bit. Looks awesome though and should be a lot of fun! |
That's sweet!! What did you use for the top sheets? Are you using 50gallon drums to float it? It would be cool to see more DIY like these
|
Looks good, it'll def put you up. If your doin a pwc don't hesitate to take it slow around 19mph first few hits. Tranny looks great only thing if I was picking it apart was maybe a little wider. But great build!
|
Could you post a pic of your design? Been meaning to build one for a wile and not sure of all the measurements.
|
Where in East Texas?
|
That looks sweet! Please tell us where it's gonna be!
And I agree some build pics/ design would be cool |
16 Attachment(s)
Quote:
Attachment 34022 Attachment 34023 Attachment 34024 Attachment 34025 Attachment 34026 Attachment 34027 Attachment 34028 Attachment 34029 Attachment 34030 Attachment 34031 Attachment 34032 Attachment 34033 Attachment 34034 Attachment 34035 Attachment 34036 Attachment 34037 |
1 Attachment(s)
Lake Palestine.
Got a hundred foot rooftop over here too |
Looks better than most of the cable parks'. I was in Palestine for work yesterday, would love to meet up once it warms up.
|
Anytime adub. We ride 3 or 4 times a week. Lake never has other boats on it til July. Will start next month. I'll private message my number. Just call the day before.
|
nice
|
Nice! I ride tyler mainly. Never been on Palestine.
I live in longview anf micah harper livrs in gilmer Sent from my SAMSUNG-SGH-I337 using Tapatalk |
Nice! I come to Palestine a few times each summer and stay at a house in Emerald Bay. Where are you guys?
|
right past the villages marina
|
Those are some great looking kickers. I always check the "I built a kicker" threads to laugh at the deathtraps, but I'd hit both of those all day long.
|
drove by the rooftop and few months ago and thought damn! thats a nice lookin rail!
Agree on the kicker, its gonna be snappy! Also for those using those blue barrels, make sure you either silicone the caps on the end. Spent a day building one and had to pull the barrel out, drain it and put it back under the kicker. looks solid!! |
That looks sweet. I've never gone off a kicker before, mainly because I ride river all the time and they have these stupid laws about not putting that stuff out. I would love to try one some day and that certainly looks like a nice one. Good job, post the results when it gets floating.
|
where do you get the top sheet material from?
|
Nice job.......... everything goes better in texas with a Shiner Bock....
|
Hey nacho, do you ride on Palestine?
|
Joel, I do. Sent you a pm. Let's ride.
|
I'll be there this weekend and all next week. You guys gonna be there and still have these in the water? I will have to come pay you a visit!
|
What did you guys use for a top material? HDPE?
|
That looks sick!
|
This thread is missing some key details, such as the dimensions so others can build successfully.
What is the takeoff angle? And what is the flat length? |
I would love to ride that thing. Im out of shreveport we ride the red river often. Joel, sent you a pm lets ride.
|
Quote:
length: just right |
Im guessing its 35 degrees :P
therefore flat length is 11.2 feet and height is 7.1 feet and when i draw the curve with a pencil i need to make the rope 16.7 feet long to result in a ramp that looks like these in this thread. The math: http://i62.tinypic.com/i5b1i0.jpg |
Good luck with that thekoning!! lol
You are incorrect in two very important variables in your math. 1. Height and 2. Radius. and since those are the two most important details your kicker will be the bigger and steeper than even the biggest kickers anywhere.
So good luck. if you are serious about building a kicker. Do a little googling, take some measurements of some kickers that you ride, or talk to someone that has built and hit kickers. This post wasn't created so people could figure out how to build kickers, it was created to get folks in East Texas to stop by and hit the kicker and rail. good luck with the 7 ft. tall, 16 foot tranny kicker you build! |
Im trying to learn how to make a kicker why are you shooting me down?, there is no information about dimensions on this thread so i have to do math using what details i can see in photos. This thread is in the *#$*#$ DIY section! Not the "check out my kicker if you happen to live in Texas, if you dont than f-off" section. So YES im expecting this post to help people make a kicker, and others believe that also since there are countless posts above from people with answered questions.
Joel if you dont have any helpful information can you not respond please. Does anyone know what dimensions a kicker should be leaning more towards. I want to make it huge but apparently the one i have in mind is too big? |
Then go start your own thread! Its a damn ramp! it isn't complicated!
|
Lmfao!!!'make 1 side as long and as high as you want throw it in another piece of plywood trace it then you got your 2 sides. Not a exact science it's what ever you want. Cut 30 or so support pieces however wide you want it and screw your 2 sides together as on the pics above then use a couple layer of 1/4"ply ( because they are bendable)and a top sheet then add flotation devices. Boom! Kicker done scientifically and to spec!
|
Eh, this Nacho thread either ;)
|
yea, but I'll be hittin that kicker while you're still trying to figure out how to use google.
Now, you've got your instructions from Red. have fun with it |
|
Any information on the source for the top sheet? How wide are you guys making these? 6-8ft?
|
New Kicker we built!! Will anchor soon! East Texas!
1 Attachment(s)
I used a sheet of 1/4" HDPE plastic from grainger on the one I built
Attachment 38964 Had to make it portable so I can take It to multiple places, a single 4 x 8 sheet worked out good for my needs http://images.tapatalk-cdn.com/15/05...1fac15213b.jpg |
Here's my 8 year old hitting it for the first time
http://youtu.be/x9LxgMGfSnk I put in 3/8 eyelets in the corners and used yard anchors In the lakebed, then ratchet strapped the ramp to pull it down under water |
Quote:
I talked to the guys at TSR and he told me their kickers were 12' long, 8' wide and 5' tall, the arch I'm not sure about, I just made mine 8' long by 4' wide by 3' tall and no arch so I can keep it mobile..... 2 people can move and set mine up with ease. |
| All times are GMT -7. The time now is 9:31 PM. |