WakeWorld

WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Wakeboarding Discussion (http://www.wakeworld.com/forum/forumdisplay.php?f=1)
-   -   Company Wake binding thumb screws (http://www.wakeworld.com/forum/showthread.php?t=807704)

jburbo 05-29-2017 8:01 AM
Company Wake binding thumb screws
 
Kind of a long shot, but does anyone have a set of the old Company binding thumb screws laying around?

alexair 05-29-2017 1:48 PM
Quote:
Originally Posted by jburbo (Post 1959812)
Kind of a long shot, but does anyone have a set of the old Company binding thumb screws laying around?
Yes. How fast need the ones? wakestream...gmail.com

wazzy 05-30-2017 9:44 AM
Joe - I stopped using the thumbscrews, get some Stainless M6 socket head cap screws & you may need a few stainless washers incase you can't find the correct length screw.

jburbo 05-30-2017 11:33 AM
Quote:
Originally Posted by wazzy (Post 1959865)
Joe - I stopped using the thumbscrews, get some Stainless M6 socket head cap screws & you may need a few stainless washers incase you can't find the correct length screw.
That's what I use on my newer setups. I am trying to set up my 2009 Severance, which still uses 1/4 20. I could go get some standard stainless screws, but I am only missing one thumb screw, so I was hoping to track one down. Keep the setup all original ;)

melvinator 05-31-2017 5:01 AM
Email me joe, I believe I have an entire set. Is this for the severance I swapped you a few years ago? mmelvin@tkschools.org

wazzy 05-31-2017 9:49 AM
Joe - if you still need some, let me know.... I may have a few extra laying around....

jburbo 05-31-2017 1:10 PM
Quote:
Originally Posted by melvinator (Post 1959922)
Email me joe, I believe I have an entire set. Is this for the severance I swapped you a few years ago? mmelvin@tkschools.org
It is! I will shoot you an email

jburbo 05-31-2017 1:11 PM
Quote:
Originally Posted by wazzy (Post 1959953)
Joe - if you still need some, let me know.... I may have a few extra laying around....
Sounds good!! I'll shoot you a message on FB

slipknot 06-09-2017 9:03 AM
I have a pair of size 8 vandals with the screws if anyone is interested.


All times are GMT -7. The time now is 10:29 AM.