Post your stereo pics!
9 Attachment(s)
Time to get a thread going of everyone's installs.
Here's mine... 2015 Moomba Mondo (4) Kicker KM8s on tower w/ custom powder coated cans (8) Kicker KM6s in the boat (4) Kicker KM10s under the helm (2) Kicker KXM 800.5s (2) Kicker KXM 400.2s (4) Custom volume controls (tower, cabin, bow & subs) Attachment 38708 Attachment 38709 Attachment 38710 Attachment 38711 Attachment 38712 Attachment 38713 Attachment 38714 Attachment 38715 Attachment 38716 http://images.tapatalk-cdn.com/15/04...530a74bcb9.jpg |
Very clean! Nice install, looks great, congrats.
|
That is nice. I just got a pair of wet sounds pro'80s in black, white pair of mb8s, 3 ppi amps, JLSub and alpine 6.5s for interior. No cool led rings or anything.
|
I love the integration of the LC1's. Very nicely done. How much airspace is in the sub box?
|
5 Attachment(s)
Just the standard system (4) Rev 10's on a ARC 600.2 (6) Wetsounds 650's on a ARC 300.4 and a 12" JL12W6V3 on a ARC 1000.1 with a clarion head unit a Wetsounds 420sq and blue led rings on all the speakers
|
A full wetsounds system on the tower, switching the sub setup out this year to 2 JL12W7. Running the stock Rockford's
http://img.tapatalk.com/d/14/05/18/a4a3ubam.jpg http://img.tapatalk.com/d/14/05/18/u3avyjuz.jpg http://img.tapatalk.com/d/14/05/18/yhe5abys.jpg |
Nice ^^^^^^
|
Quote:
|
2 Attachment(s)
Quote:
Attachment 38722 Attachment 38723 Quote:
|
Greeko I'm hoping to have the new box finished up next week.
|
Tower is a Kicker 6500.2 six pack, powered by a PPI P600.2
https://lh3.googleusercontent.com/-D...420_194611.jpg Blue LED strips behind plexiglass rings with LED's to light up the cones of the mids. https://lh5.googleusercontent.com/-u...420_192757.jpg https://lh5.googleusercontent.com/-v...420_192736.jpg https://lh3.googleusercontent.com/-v...420_203422.jpg MB quart headunit with Ipod and USB inputs, remote by driver and remote on transom. Wetsounds WS420SQ zone controller. Two Infinity reverence 10" subs. https://lh3.googleusercontent.com/-t...320_204054.jpg Polk DB651's for the cabin speakers. Cabins and sub are driven off a Kicker 700.5 https://lh3.googleusercontent.com/-Z...o/GOPR1318.JPG https://lh3.googleusercontent.com/-w...317_224714.jpg I'm still in process and need to add the LED's to the subs, cabins, and cupholders... |
I love the leds. Are they easy to install and how much does it cost. Let's say 4x6" cabins 8 cup holders and a pair of rev 10's?
|
Quote:
The LED's to light up the cones were about $2.50 each for the cabins and towers. *Keep in mind that my prices are going to be less on things because for all the stuff mentioned above I'm having LED's and plexiglass done for only 6.5" speakers. Getting plexi cut for larger diameters would really up the price. it also makes the price go through the roof on plexi with increased thickness. I couldn't afford to do plexi on my subs because I was also looking to have the rings be spacers so I wanted pretty thick. For the subs, I'll have about $5 each into the LED's around the outside and $4 each for LED's to light up their cones. Cupholder LED's will be super cheap, just a couple bucks each for strips. For the cupholder and sub rings, I'll be using polyethylene tubing like a few on here have done before. (I used it for the cupholders on my last boat before I sold it). As far as how easy... I'd say middle of the road. Finding the right combo of materials took a lot of research and some trial and error. I was working with 1/4" plexi, so drilling in that was a bit of a pain. I actually cracked one of my rings but was able to glue it back together and you can't really tell. Most LED strips are wider than the ones I found and have the LED's a lot father apart. I used a hot glue gun to attach the LED's to the inside of my rings. https://lh5.googleusercontent.com/-C...420_154147.jpg Like I said, key is finding the right LED's for your application and then the rest of it is just mounting everything up and basic wiring. https://lh3.googleusercontent.com/-o...420_163545.jpg https://lh5.googleusercontent.com/-Y...420_163556.jpg https://lh5.googleusercontent.com/-L...420_163657.jpg |
Here's our stage 1:
4 skylon vector 8, 12g wire to the amp, Rockford fosgate T1000-4, and a new stinger 200a breaker switch. I also got an alpine type R 12" sub http://i230.photobucket.com/albums/e...psqihxd0zt.jpg Stage 2 will probably be another Rockford t1000-4 amp and new RF marine 6.5" |
Do you mind sharing the eBay Vendor for the Rings as I would like them for my 6.5 cabins.
Thanks |
Quote:
http://www.ebay.com/itm/1pc-Acrylic-...item2c95e9b8a7 Then, contacted the vendor to get the inside of the circle laser cut as well. If you just go with the cutout diameter of the speaker, it won't be enough to glue the LEDs to the inside. And at only 1/4" thick, most led strips are too wide for the plexi ring thickness. My first batch of rings didn't have an inside diameter thick enough for LEDs on my kickers tower speakers, but worked okay on my Polk coaxials. And I had to be super careful drilling the holes for the mounting screws. |
if you want to go cheep and save some work http://www.ebay.com/itm/BLUE-LED-SPE...item2c91a33c6d under $100 to do six speakers
|
https://scontent-atl.xx.fbcdn.net/hp...cf&oe=559CD468
https://scontent-atl.xx.fbcdn.net/hp...76&oe=55C9BB28 And here's a Centurion that I did an install in 4 YEARS AGO. This boat left after it was completed and hasn't been back once with faulty equipment or faulty installation. https://www.youtube.com/watch?v=OdFSc0HEeEg |
John
Did you sand the edges of the ring to hide the individual leds? And if you did what grit sand paper did you use? I like how yours look like it is a continuous light and not little dot's of color. |
Most of those are the Wet Sounds LED's. The ones I do myself are normally frosted and then torched. I don't have the time it takes to make my own so most of the time I just use rings from WS.
|
These speaker pods look awesome!!!! Can you put up some closer pictures and more info on them? Can you make them without the boat and ship them?
Thanks! Quote:
|
check my facebook page for more pics - "Pro Installz Mobile & Marine". There's a photo album with build pics.
I won't build those without the boat, unless I get a local customer that comes in for some too. I'm in Paducah, KY. |
|
Man you do some outstanding work! Sure wish you were closer.
|
All times are GMT -7. The time now is 11:54 AM. |