Ronix to Hyperlite
My Ronix board broke so I bought a 2014 Hyperlite Marek. Will my 2011 Ronix relik boots fit on my new board. It says to use M6 hardware which I assume I had with my old board but it feels like they won't tighten to the bottom
|
Ronix didn't switch to m6 until 2013 I think so you will need new screws. I made the exact same switch a couple weeks ago for same reason and am loving the marek!
|
^Correct. You had 1/4-20 hardware with your releks, you need to use M6, which is an easy fix. Any wake website should have it.
|
I switched to marek also. Love it, but be careful it locks in edging and bites into the water, when I first switched I was used to the looseness of the ronix and more forgiving abilities of the looseness. Marek will bite and bite hard....
|
Home Depot has M6 screws.
|
you'll need m6 screws. they're $20 online but I have a few extra sets actually
|
All times are GMT -7. The time now is 5:41 AM. |