Servicing my Sanger
 

I think I asked these questions already but I cant seem to find my previous posts like on other forums . Im sorry if I'm repeating my posts.

Im getting ready to change the impeller,oil and filter . I was wondering if you guys knew the Napa or Wix oil filter number and if any of you with higher hours are switching to a thicker oil or sticking with the OEM specs ? I recall Kendall oil being highly recommended at 1 time does this still hold true ?

I buy OEM Mercruiser Quicksilver parts, stocked in-store, at WalMart. In the auto parts area they have the recommended 25W40 oil, recommended Quicksliver OEM oil filter & fuel filter/water separator. I order impeller on line. My V210 has 1050 hours on it and I have no reason not to stick with the OEM recommended oil.

I never even thought to try Walmart . Thanks for the info . I wasn't sure about the oil but I know these rollor motors want a lot of zinc to keep them lubed up good . Do you happen to have a filter part number ?

Don't have the part numbers handy. Google. Also check the numbers on the filter you're removing. That said, there's only one inboard 4-stroke Quicksilver oil filter in stock at WalMart and it's the right one. There's only one fuel filter there too. Recommended Quicksilver 25W40 oil as well.

me neither!

Ok so I got everything coming except I went with Valvoline VR1 Racing oil with a lot of zinc .

I got a new impeller with housing this time too the last time I changed the impeller the housing was getting rough .

THANK YOU

I wish someone would figure out how to catalog and identify Merc parts, cause it's a PITA search for the right parts every time

Don't forget the impeller
Mercruiser #47-862232A2

remembered finding them, just couldn't remember where to start. should probably save these...

I saved that link this time !!! Thanks .

What about the impeller ? Anyone know the number on it ? I have a complete kit with housing but I dont know if its for this boat or not . I wish I would have wrote on it what it fits .

http://www.skidim.com/DOUBLE-FLAT-SH...nfo/BBB136327/

same one Andy had above

DOUBLE FLAT SHAFT IMPELLER MERCRUISER
AROUND 2002 UP MERCRUISER
#47-862232A2, Black Scorpion S/N OM391600 and up, S/N OW690000 and up. MX 6.2L S/N OM317000 and up. 5.7 MPI SKI S/N 1A090000 and up. New style pump that has the 2 blue water drain petcocks.

THANKS DUDES !!!

My boats a 1998 . I'm 95 percent sure I have the right kit. lol ( you never know) The one I have is a Sierra kit and according to Sierras website it has to be the right one . My Pump doesn't have drain cocks on it either If I'm not mistaken .

one I linked is for 2002 +, I think....

You sir are correct . 2002 was right when they changed over according to the research I have done.

Holy crap I've been busy . Got my boat serviced thanks for all the help here guys . I got my buddys Chapparal Deck Boat dialed in an ready impellor and the rest of the service cha cha . Now to finish his trailer brakes . Then next weekend I'm doing another Sanger this time my cousins V215.