|
Quote:
Nice! |
|
5 Attachment(s)
Some pics for winter - To get you excited for spring!:D
Not long now! |
13 Malibu MXZ
5 Attachment(s)
Here's a few pics of my boat. She's for sale! Waiting on the new boat. Putting up her build pic as well.
|
Nice looking boats
First post on here. Nice looking boats
|
Photo
1 Attachment(s)
Here is a photo of our 2013 242 worlds.waiting for spring
|
The 242 are definitely one of the best looking boats on the water!
|
Quote:
|
Quote:
The tower speakers are wetsounds rings. The rear cupholder rings came from earmark in tx |
5 Attachment(s)
Here is my Ri257, moved from 2015 24MXZ.
Attachment 42527Attachment 42528Attachment 42529Attachment 42530Attachment 42531 |
Wow!!!! is that the factory bimini on that 257? That's YUGE!
|
Yes that is the optional sewlong bimini, it covers most of the interior
|
:)
Quote:
|
The crazy thing is these shots are 100% from the factory, out of the box wave pics. In the comparison top/bottom pic, look how much wave is behind him, he is holding a 25' rope.
|
Good looking boat Dark
|
|
Tige R21
4 Attachment(s)
|
|
When did Tige change their towers?
|
Just their R series have the tube towers.
|
|
Awesome SAN, love 'em!
|
2 Attachment(s)
my 210
|
|
|
That F22 is nice
|
Thanks!
We powder coated over 90 pcs before it was built |
Pretty awesome this thread is still alive! I must have 3-4 different boats posted...here's the '17.
https://uploads.tapatalk-cdn.com/201...921621f5f0.jpg |
https://uploads.tapatalk-cdn.com/201...c9a4c7a252.jpghttps://uploads.tapatalk-cdn.com/201...f365b833e5.jpghttps://uploads.tapatalk-cdn.com/201...d4f36d8cad.jpg
The Supra SA is one awesome boat. Loving every second we spend in it! |
3 Attachment(s)
2014 sv244
|
Love that SV!!!
|
Thanks, been an awesome boat. Spending time on lake with family is my prozac and our favorite thing to do. Had boats and done water sports all my life, but last year was my first time trying surfing, got
addicted. Goal is to learn how to air by end of summer (without drinking water after the air, lol). Also cannot believe how well the boat does on fuel. Burns average of 4.5-5gph surfing @ 3200 rpm with 5000lbs of ballast and 4-6 people.....or no ballast cruising at 4000rpms. When i bought it, figured I would be burning double that an hour. ZR 409 PCM engine. |
|
An oldie but a goodie
1 Attachment(s)
Finally got some pics with full ballast.
|
2 Attachment(s)
My 2002 SAN 210
|
^^^^^^^^What a Beaut!
|
Same old boat ... but we got a new lift this year:
https://scontent-iad3-1.xx.fbcdn.net...f0&oe=5A5A279B |
Thanks Miguel!
|
Quote:
|
Quote:
|
3 Attachment(s)
2018 Malibu 22MXZ on order pimp 'n' plush
|
So hot. In both ways.
|
Gonna be pretty warm in that boat once the sun is out lol jk nice boat.
|
1 Attachment(s)
2017 nxt22
|
3 Attachment(s)
1995 Sunsetter and 96 7.3 Ford
|
|
|
Quote:
|
2 Attachment(s)
2016 sanger
|
|
|
4 Attachment(s)
Nxt22
|
2017 Moomba Mojo
Boat has been an absolute blast and solid upgrade from our 2008 Moomba LSVhttps://uploads.tapatalk-cdn.com/201...c384b605cc.jpghttps://uploads.tapatalk-cdn.com/201...6708e05c04.jpghttps://uploads.tapatalk-cdn.com/201...a95631d33a.jpghttps://uploads.tapatalk-cdn.com/201...96700e9604.jpg |
2 Attachment(s)
2016 f22
|
|
|
Sick pic Micah!
|
Quote:
That looks amazing. Great work on the build. |
Quote:
|
Quote:
Thanks Dark! |
Quote:
Put some tint on and this boat is extra [emoji91][emoji91] |
Quote:
Finding someone to tent it is the problem... |
The boat pic thread
Sick!
|
|
those bu's look great!
|
That is a sharp looking BU. I was able to find someone to tint my boat locally, they did a really good job for about $225...harder to find someone with experience on boats for sure and most people that know
how to work on boats charge double that. They showed me an option to use another kind of tint (think ceramic)...which blocks much more heat than normal tint. I didn't do it cause I did not see the option till after my tint was already done, but for $50 more, I would have done it for sure. Would think that would help keep dash looking better longer to reduce the heat intake. I went with 20% and it looks great since my boat is black and blue....but it is tougher to see out of windshield. I stuck with that dark since I am always on bolster seat anyway and look over windshield but if you will be looking thru windshield a lot, probably wont want to go darker than 35%. |
Quote:
Where are you located? |
4 Attachment(s)
Was in the mood to see some boat pics. Getting some spring hype haha.
I look forward to start that engine lol. |
5 Attachment(s)
Nautique 210 2017
|
Sweet boat, I like the transom walk-thru the best on the Nautique's, great design that keeps people off the vinyl when getting in/out of water. I am working with a vinyl guy now to figure out how I can
add a step into the center of my back seat (like the G3 has, I know the 210/230 have a removable cushion which is also nice but mine is too wide to remove), to keep people from stepping on vinyl. Hoping he can remove the skin, cut out some of the foam where step will go and add a block of hard rubber or something similar...then re-skin and then I can add a step on top of vinyl made out of GatorStep or similar. Then when people step on that area, it does not push down on the vinyl. Those are always the seams that split first on every boat. Anyway...got off track there. Awesome boat! |
Quote:
On my past boat I re-made the transom storage vinyl before selling it. After 9years it was time! I was young, used to always bring a bunch of friends, wine, all so much mess haha.. ain’t protecting it very well either. Outback V was made with 3 pannel on the back so I removed them (unscrewed at the hinge). Took me 5minutes take them to a vinyl guy who tapped the foam and pretty much don’t know what he made lol and recover them with all new exaxtly same design vinyl for 500 buck Canadian. Made all the difference when I sold it. It looks like new. That was the most efficient investment I made on it. Just to say that, yeah it pretty messed up the boat when everybody walks on the vinyl. Creating a walk thru if it’s possible it’s great! But if it’s too complicated maybe just renew the vinyl can be more cost effective and give you 5more years to look like new! And oh yeah thanks for the compliment D ! Appreciate it |
I have a walk-thru on my transom sun deck already....its the back seat that I have nothing and everyone has to step on seat to get up to the walk-thru on transom. Makes no sense!
But hopefully vinyl guy can add something functional for me as he is re-skinning the back seat and I wont have that issue any more. Should not have a seam splitting already on a 2014 boat, especially cause I am so anal and OCD about my boat and always telling everyone to not step on the vinyl. |
Oh okay! Misunderstanding lol. Yeah like you said transom walk-thrue and a cushion seats in the middle is a bit problematic.. good idea You have to solve the problem! Nautique have a removable cushion like you said but it’s always stored I never put it in place.
Me too now I’m extremely over protective haha. Our toys are so expensive.. At these price it’s just crazy to not take good care of it! |
|
2017 Moomba Mojo Surf Edition https://uploads.tapatalk-cdn.com/201...f0e9e38abd.jpghttps://uploads.tapatalk-cdn.com/201...a962c6d56a.jpg
|
2018 Malibu 23 LSV
|
2018 23 lsv
|
|
Yes! Love that view. Nice pics guys
|
| All times are GMT -7. The time now is 10:17 PM. |