Ronix to Hyperlite
 

My Ronix board broke so I bought a 2014 Hyperlite Marek. Will my 2011 Ronix relik boots fit on my new board. It says to use M6 hardware which I assume I had with my old board but it feels like they won't tighten to the bottom

Ronix didn't switch to m6 until 2013 I think so you will need new screws. I made the exact same switch a couple weeks ago for same reason and am loving the marek!

^Correct. You had 1/4-20 hardware with your releks, you need to use M6, which is an easy fix. Any wake website should have it.

I switched to marek also. Love it, but be careful it locks in edging and bites into the water, when I first switched I was used to the looseness of the ronix and more forgiving abilities of the looseness. Marek will bite and bite hard....

Home Depot has M6 screws.

you'll need m6 screws. they're $20 online but I have a few extra sets actually