WakeWorld

WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Boats, Accessories & Tow Vehicles (http://www.wakeworld.com/forum/forumdisplay.php?f=3183)
-   -   I JUST had to replace the Molding(RUB RAIL),,,What a PAIN in the A$$ (http://www.wakeworld.com/forum/showthread.php?t=808495)

MooSeMan 03-09-2018 3:51 PM
I JUST had to replace the Molding(RUB RAIL),,,What a PAIN in the A$$
 
3 Attachment(s)
This guy wanted his Plank Remove from 29' Sea Ray and Reglassed and spayed with Gel Coat...
NEVER replace the Molding from a boat ,,,ONLY if you have to ,That stuff is put on at a Factory...

Stazi 03-09-2018 3:59 PM
Why would he want to remove it? Weird

MooSeMan 03-10-2018 11:42 AM
I don't ask WHY ,I take there $$$ and give them what thay want...

infinitysurf 03-10-2018 3:55 PM
Looks like you did a good job with that, none of that work looks easy

Stazi 03-11-2018 6:41 AM
Quote:
Originally Posted by MooSeMan (Post 1976516)
I don't ask WHY ,I take there $$$ and give them what thay want...


[emoji28][emoji106]

denverd1 03-12-2018 9:06 AM
the moose doing rubrail work!!! :)

MooSeMan 03-15-2018 9:19 PM
Pulling the Molding off ,it helps to have a helper so you don't fold the Molding ,and If you don't have a helper ,,,You leave the last screw in and the middle screw in and the first screw in ,,, Tape the Molding to the boat ,then take the screws out and the molding wont fold on you ,the molding strip on this boat were about 15 feet ,,,It just helps if someone holding the End ,when you get to the last screw...


All times are GMT -7. The time now is 2:24 AM.