Dial in wave help
 

Just looking for some tips on dialing in my wave. I have a 2009 moomba mobius lsv, back tanks are 750's, middle is 400, I also have 2 400 lbs bags that I fill with a tsunami pump and can put wherever. I usually go about 10.7 mph for goofy riders and put wake plate half to 3/4 up. Anyone give some tips on bag placement, speed or what not. I ride a phase 5 danielo diamond and have a soulcraft fang tail on the way. Thanks guys

You can start with the most common setup.
Fill the 750 surf side
Fill the middle 400
Fill 1 of the 400 put it on the seat surf side

If that doesn't work, you can fill the other 400 and put it on the rear bench in the corner (L shape along with the 400 you have on the seat)

If it were me, I would stack a 400 on top of the 750 in the back corner -- as well as fill the middle. Aim for a 6 degree tilt (use a phone app to measure). If your wake needs more beef, you can start to add some weight in the opposite corner (more boat in the water). Just make sure to keep that tilt around 6.

any bow weight?
Stack a 400 on the 750
500 bow and people on surf side

play with the plate and speed

try it with out the middle tank. took a guy out who had a SAN and he was running his stock middle wieght and we dumped it and it cleaned up and made a nicer wave without it