Wetsounds REV 10 3 some amp options
 

I received my 3 some package in two shipments from my local shop...the 2 rev 10's at the end of last season, and the 410 just last. ****ty I know.
I wired the 2 rev 10's to a Exile 800.4- two channels bridged to each. Now my 410 shows up and the shop sells me a SD4.
I am thinking I should return it and get an SD6 to run all three speakers- bridge two channels for each component on the 3 some.
Any suggestions? Is this the best route, or do I use what I have?

SD6 would be the best route and would keep it down to 1 amp. It will scream with that setup!

Ya im thinking that's the best route here

SD 6 and 3 some all wired in...and it sounds ****ing awesome!
Working on tuning.....any one have any tips? SO far I have the two 10's channels at roughly 65% gain, the center 410 at 75%.
Should they be set in High pass?

Yes, all channels should be set to HP.