Need a little forum help or direction.
I have a 2002 Calabria Pro-V. The boat is in very good shape with the exception of the glove box. Where would I go to get a replacement drop in glove box( doesn't have to be a Calabria one) I can cut the hole to fit, just not having much luck finding something to replace it with. I've tried looking up like kayak hatches and the likes but nothing is close to the dimensions. I need something in the 15x20 range. I just keep running into roadblocks. ANY help would be greatly appreciated.
|
You could check out the Tempress hatch lids and hatch liners, but looks like they may come up short on the 15 dimension, as they have one that's 13 x 23.
What's wrong with you box? cracked tub? broken lid? |
Cracked lid and broken latch. Boats in storage so I don't have the exact dimensions.....just know that I couldn't find one big enough before.
|
Any chance you can fix/patch the lid with some sort of epoxy, and then vinyl wrap it? Latches are fairly easy to come by. If your box is 15 x 20, that's a massive glove box, and I'm not sure you'll find much in that size. Mine's a drop in that's roughly 15 x 10 or so similar to this one: https://www.nautiqueparts.com/produc...-box-with-lid/
|
One other option I just stumbled across is this place: https://www.deepbluemarine.com/custom.cfm
Looks like they'll do custom sized hatches out of Starboard. |
Its been epoxied......but its just old and looks bad and cheap.
|
Thank you Tom......maybe they can make something for me.
|
All times are GMT -7. The time now is 11:49 AM. |