M6 hardware for my new 2013 Bside??
ok got a brand new warranty replacement board and noone told me id need new M6 hardware for it., found out after i went top put bindings on it!!.
i ride HL Systems so will just some simple ss 6mm bolts work? anything in particular I should look for like legnth and thread type ie coarse/fine and head type like counter sink phillips any washers needed??? or is it not worth the hassle finding these and just get some from a pro shop? TIA |
If you have a local shop they will most likely just give them to you.
|
I found some at Lowes that worked, but it was a pain - I would start at your local shop first.
|
if you go to the right place itll be pretty easy to find the right stuff. you could get one of those cool pitch gauges!!! but anyways, depending on where you are located, a Fastenal or a Copperstate nut and bolt will definitely have what you need. get something 316 or 318 stainless
|
The Home Depot here had a better selection than Lowes, where I went first. Got SS M6 for my CTRlL RX board.
|
I would just call hyperlite and they will probably just send you what you need free of charge. I am not certain of this, but they have always been good to me on warranty items, and I really don't know what they don't send them with the new boards. I was just at my local shop this week and the guy there was telling me that they switched this year on the boards. He said that they send regular and metric bolts with the new 2013 bindings, but they don't send the bolts with the new boards and that really doesn't make sense to me. Give them a call if you have a few days to wait on them .
|
i was able to get some ss m6 bolts with phillip head at an Ace Hardware store , however i brought the old bolts to make sure length would be equal. $1.18 EACH
they screwed in board fine but were two threads from tight, so if you go get some make sure they are a little shorter then original.. I was too lazy to go return them so i hack sawed 2-3 thread legnth off and they fit great along with some blue locktight, i should be safe, i hope :P I however did manage to drop or lose one of my system binding washer, you know the black thing with teeth for one of my boards and cant find it anywhere! it might be hard to get just one of those! anybody know if they sell just one? |
My '13 Hyperlite Murray just came in and I'm in the same boat... The hardware didn't come with the board and my existing hardware obviously won't work since they changed to the m6 inserts for the '13 models. Pretty disappointed after all of the gear I've purchase from Hyperlite that they can't even send a basic hardware kit with their new boards after a design change. This is customer service/common sense 101 stuff here.. I plan on using my Team boots from this past season so going to put in a call to Hyperlite and see what they will do.
|
Ur telling me they didnt include it with the board? When another big board company was making the initial switch to M6, they included the hardware.
|
Yea they didn't include it. They want to make sure you use archer brand boots with your archer brand board...
|
Quote:
|
Quote:
|
I'm sorry I know it's sad, but true. They're trying to force natural selection on the other brands with frivolous evolutions
|
I'll get you some M6 hardware..
Yo!
This is Erik from Hyperlite.. Give me a call here at the factory and I'll send you some M6 screws no charge. 800-938-4646, you can ask for me or if I'm not available just give your info to whoever picks up and I'll get them in the mail today. |
^^^this is just awesome!
|
Hyperlite continues to impress me with their Customer Service everyday. Great job Erik!!!
|
Quote:
Thanks again. |
yea they sent me 4 free screws and the claws without question not long after my OP.. very cool!
|
All times are GMT -7. The time now is 6:44 PM. |