WakeWorld

WakeWorld (http://www.wakeworld.com/forum/index.php)
-   Boats, Accessories & Tow Vehicles (http://www.wakeworld.com/forum/forumdisplay.php?f=3183)
-   -   Rev 410s on Supra S-Bend tower (http://www.wakeworld.com/forum/showthread.php?t=806804)

dusty2221 08-05-2016 2:43 PM

Rev 410s on Supra S-Bend tower
 
Anyone have any photos or attempted to mount them onto the S-Bend?

Shane10p 08-06-2016 11:18 AM

Nope I've got 6 Exiles if you want photos ;).

Preston 08-06-2016 3:40 PM

My friend has a pair of Rev 410's on his Mojo with the S-bend tower.
http://uploads.tapatalk-cdn.com/2016...64148c0302.jpg

jonyb 08-06-2016 8:27 PM

Dusty, what about a single 410 with a pair of Rev10's? That way the Rev10's wouldn't be affected too bad with being off-axis?

dusty2221 08-06-2016 8:30 PM

The Supra tower just won't let one mount in the middle due to the cross piece. It's no longer just a tube but flat.

http://uploads.tapatalk-cdn.com/2016...ad45c81303.jpg

The off axis look would end up driving me insane, and there are a few differences in the moomba s and supra s that I'm not even sure they would mount.

jonyb 08-07-2016 1:27 AM

I haven't had any newer Supra's in my shop yet, and haven't seen any at the lake. You may be better off sticking with the Rev10's.

dusty2221 09-08-2016 1:15 PM

Just an update, Tim and Odin helped me make this happen. Tim got an empty pod in my hands so I could take measurements and have custom brackets machined. I know have 2 410s on the tower powered by an sd4

dusty2221 09-08-2016 1:17 PM

http://uploads.tapatalk-cdn.com/2016...90e393a32b.jpg

http://uploads.tapatalk-cdn.com/2016...8a83864b53.jpg

http://uploads.tapatalk-cdn.com/2016...dedc7f17e0.jpg

Shane10p 09-08-2016 1:20 PM

Meh ....

DavidAnalog 09-08-2016 1:52 PM

Dusty,
WOW! That is so impressive that you were able to level the speakers on a radiused tower.

And, I'm a big fan of tower speakers that are on the same depth plane.

dusty2221 09-08-2016 2:44 PM

Thanks David.

DatTexasBoy 09-08-2016 6:34 PM

As long as you are happy that's all that matters. Not for me though.

jonyb 09-11-2016 7:15 AM

Looks great!

mark197 09-11-2016 5:13 PM

Dumped exile huh?

dusty2221 09-11-2016 8:05 PM

Made the switch, yessir.

DavidAnalog 09-12-2016 7:16 AM

Dusty,
Any close-up pics on the design/millwork of the custom tower speaker mounts?
Have you copied the mounts to Wetsounds?

DatTexasBoy 09-12-2016 12:43 PM

Nice Install........

Pics of the Amp Rack???

Still cant believe you switched!!!!!

dusty2221 09-12-2016 1:27 PM

http://uploads.tapatalk-cdn.com/2016...f26e905746.jpg

I did the same thing I went with on Kg's Mojo. This is a pic of his, but I did mine identical.

From left to right:
Sd2 - powering 12w7
Sd4 - powering 410s
Sd6 - powering in boats

4 zones of rgb lighting in the boat, (1) Floor, (2) Mid level, (3) speaker rings and tweeters, (4) tower and exterior accents. Each is independently controllable or can be synced together as 1 zone. All share the same remote. All factory integrated, no additional switches or magic combos of buttons to try and explain to someone. Everything is ran thru the vision system with the redundant factory switches

DatTexasBoy 09-13-2016 8:52 AM

Looks good brother

Connolly_Crew 09-14-2016 5:09 AM

Quote:

Originally Posted by dusty2221 (Post 1944640)
http://uploads.tapatalk-cdn.com/2016...f26e905746.jpg

I did the same thing I went with on Kg's Mojo. This is a pic of his, but I did mine identical.

From left to right:
Sd2 - powering 12w7
Sd4 - powering 410s
Sd6 - powering in boats

4 zones of rgb lighting in the boat, (1) Floor, (2) Mid level, (3) speaker rings and tweeters, (4) tower and exterior accents. Each is independently controllable or can be synced together as 1 zone. All share the same remote. All factory integrated, no additional switches or magic combos of buttons to try and explain to someone. Everything is ran thru the vision system with the redundant factory switches



Sick...... Welcome back from the Dark side!!

Jmorlan 01-11-2021 2:49 PM

Quote:

Originally Posted by dusty2221 (Post 1944405)
Just an update, Tim and Odin helped me make this happen. Tim got an empty pod in my hands so I could take measurements and have custom brackets machined. I know have 2 410s on the tower powered by an sd4


This might be a long shot. But I’d like to do 2 410s on my Supra with S bend.
Any way I could get a set of the clamps where you purchased them from?


All times are GMT -7. The time now is 2:45 AM.